Next G3N Greenhouse of Chino, CA builds rolling benches, MTFR racking and greenhouses for cannabis growers. Urth & Fyre specifies and supplies the line.
Next G3N Greenhouse, written by the company as Next G3N and in trade press as NextG3N or Next G3n, is a greenhouse and rolling bench manufacturer at 14756 Central Avenue in Chino, California. Founder Josh Conley is the third generation of a greenhouse manufacturing family whose grandfather started Conley's Manufacturing and Sales in 1946, and the company builds rolling benches, multi tier racking and greenhouse structures for commercial cannabis growers.
Urth & Fyre specifies and supplies Next G3N benching and racking in the cultivation facilities it designs. Searches for the brand are small, so this page covers what buyers look for: rolling benches for cannabis, grow room benches and vertical grow racks, and how to choose between them.
Next G3N builds single tier, double tier and v track rolling benches with integrated ebb and flow plastic trays. The company says its benches use almost twice the steel and aluminum of typical grow benches and include an integrated trellis.
The Next G3N MTFR system is a rolling rack for vertical grow space. Standard heights are 8, 10 and 12 feet with custom heights available, tier spacing adjusts to the inch, and the racks ride on a 12 gauge steel floor mounted track. Columns, tracks and crossbars are galvanized steel, siderails are 6063 aluminum, trays are continuous, and integrated air ducting and fans are optional.
Wire top rolling benches come in 4, 4.5, 5 and 6 foot widths with custom lengths and heights from 10 to 30 inches. The ECo bench adds low profile underbench air ducts mounted to fans for vertical airflow, and rolling beds for living soil carry a maximum rating of 46 pounds per square foot. Next G3N also builds commercial greenhouse structures and, since 2024, distributes Rovero greenhouse technology in US states west of the Mississippi.
Start with the room and work in. Measure the clear floor, columns, doors and drains, then set bench width to what staff can reach from one side or both. Choose tray type for your irrigation method, either ebb and flow trays or wire tops for containers, and set bench height for the crew and the lighting distance.
For racks, the tier count follows ceiling height, lighting fixture depth and the clearance needed for plants and airflow at each level. The bench and rack plan feeds directly into the lighting, irrigation and HVAC design, which is why Urth & Fyre recommends you design the facility around the equipment list rather than fitting equipment into a finished floor plan.
Fixed tables are the simplest and lowest cost option, but each table needs its own aisle, which limits how much of the floor holds plants.
Rolling benches shift sideways so a room needs only one movable aisle that can open at any point. A consultant interviewed by MJBizDaily estimated that rolling benches add up to 20 to 30 percent more canopy in a room, depending on methods and experience.
Mobile carriage systems and racks like the MTFR stack canopy vertically or move entire rows, which raises plant count per square foot but adds lighting, irrigation and HVAC on every tier. They fit best where plants stay short, such as propagation, veg and mother rooms.
Urth & Fyre specifies and supplies Next G3N benching and racking and sources and quotes the line new as part of a room or facility design. Benches are laid out with lighting, airflow and irrigation so the quote matches the rooms as built. Urth & Fyre reports more than 1 million square feet designed, and the commercial grow room equipment list shows how benching ties into the other room systems.
To get a Next G3N bench or MTFR layout and quote, book a cannabis facility design consult and send your room drawings.
What is the correct name, Next G3N or NextGen?
The company writes its name as Next G3N, with the numeral 3 in place of the letter E, and trades as Next G3N Greenhouse. Trade press also prints it as NextG3N and Next G3n. Buyers often search NextGen benching. All of these refer to the same Chino, California, bench and greenhouse manufacturer.
What are rolling benches for cannabis?
Rolling benches for cannabis are grow tables mounted on pipes or rollers so they shift sideways, letting a room run with a single movable aisle instead of an aisle beside every table. That frees floor area for canopy. A consultant quoted by MJBizDaily estimated up to 20 to 30 percent more canopy per room.
What is the Next G3N MTFR?
The Next G3N MTFR is a Multi-Tier Floating Rack, a rolling vertical rack system for cannabis grow rooms. It comes in 8, 10 and 12 foot standard heights with tier spacing adjustable to the inch, runs on a 12 gauge steel floor track, and uses galvanized steel frames, 6063 aluminum siderails and continuous trays.
What sizes do Next G3N rolling benches come in?
Next G3N wire top rolling benches come in 4, 4.5, 5 and 6 foot widths with custom lengths and adjustable heights from 10 to 30 inches. Indoor rolling benches come in single tier, double tier and v track versions with ebb and flow trays, and MTFR racks come in 8, 10 and 12 foot heights.
Are rolling benches worth it in a grow room?
Rolling benches are usually worth it when floor space is the constraint, because they replace fixed aisles with one movable aisle and add canopy without adding building. They cost more than stationary tables and need a level slab. Run the added canopy against the bench cost and your yield per square foot.
Where can I buy Next G3N benches?
Urth & Fyre specifies and supplies Next G3N rolling benches and MTFR racks inside its cultivation facility designs and sources and quotes the line new. Send your room drawings, irrigation method and target plant count to get a bench layout and quote built to the room dimensions.