Premium Used and New Cannabis Extraction and Processing Equipment

A test-driven, buyer-focused acceptance test checklist for used/reconditioned lab circulators and chillers—covering temperature stability under load, heat-up and pull-down performance, pump verification, leak checks, alarms, sensor validation, electrical draw, noise/vibration, and visual inspection—plus the most common commissioning pitfalls and how Urth & Fyre can deliver documented SAT results for production confidence.

In-process potency testing can speed decisions without creating a “shadow lab”—if you design it like a controlled, QA-owned decision-support system. This post lays out a practical release-support workflow (sampling, chain-of-custody-lite, daily system suitability, calibration/verification checks, defined use cases, and audit-ready documentation) and shows how a turnkey HPLC like Urth & Fyre’s Shimadzu Hemp/Cannabinoid Analyzer can fit into a governed operations environment.

Most net-contents headaches on high-speed packaging lines come from control latency: variable product flow meets slow feedback, creating either overweight giveaway or a spike in false rejects. This practical guide shows packaging managers how to design buffer capacity, set target weights versus tolerances, and use checkweigher data to tune a multihead weigher upstream—while calling out common failure modes like sticky product smearing, vibratory feeder drift, tare variability, and sloppy changeovers. Includes benchmarks, an easy-to-explain control-loop diagram, and SOP-ready steps for NTEP-appropriate verification and audit defense.

Micro-cracks and late-stage leaks in press-cap vapor devices are usually born from tiny misalignments, dimensional drift, contamination, and inconsistent force ramps—not “bad luck.” This practical guide shows packaging and QA managers how to build a daily routine around tray/fixture checks, first-article verification, force setpoint validation, and a simple destructive test cadence, with documentation patterns (URS/FAT/SAT-lite, training sign-offs) that make the process auditable and repeatable.

Choosing the right bath fluid is the fastest way to protect your high temperature circulator, hit reaction temperature under load, and avoid sludge, seal swell, and audit headaches. This guide breaks down viscosity, oxidation stability, flash/autoignition safety, materials compatibility, filtration, change intervals, and documentation—plus how to match fluid choice to circulator pump capability like the JULABO SL-12 (300°C, 12 L).

A repeatable 30-minute pre-shift cartridge filling setup routine for production supervisors—covering thermal equilibration, viscosity confirmation, needle selection, purge/prime, timed dose checks, and first-article approval—plus the failure modes and documentation practices that reduce rework and improve audit readiness. Includes a practical workflow for the Thompson Duke MCF1.