Cultivation management case study —

Full cultivation management: 3,034 to 7,071 pounds in one year

3034→7071lbs per year
Cultivation consultingOperating, underperformingClient not named
HPS flower room with trellis grid and rolling benches
The problem —

Where it started

A Nevada producer with about 11,000 square feet of canopy (8,000 flower, 3,000 veg) could not get consistent harvests. In 2020 the facility produced 3,034 lbs at 28 grams per square foot. About a third of batches failed microbial testing, and production cost $2.97 per gram.

Unpredictable output made sales cycles unpredictable too, and a cultivation team of 25 carried a labor cost of $862,000 a year.

The approach —

What we did

Urth & Fyre ran the facility under a full cultivation management program for 22 months.

  • Tenant improvement, $404,000. Environmental systems redesigned around latent load. Flower rooms were set up with 560 315 W CMH and 320 1000 W HPS fixtures, veg with 150 CMH fixtures: 1,030 fixtures and 551 kW in total.
  • Airflow, fertigation and plant density reworked room by room.
  • SOPs and maintenance. Audit schedules, inventory management and a continual maintenance program.
  • Labor. The cultivation team went from 25 people in 2020 to 10 in 2021.
  • Biosecurity and post harvest. Cleaning protocols, plus automation in the dry and cure rooms.
The results —

What changed

  • Yield: 3,034 lbs in 2020 to 7,071 lbs in 2021, from 28 to 67 grams per square foot.
  • Microbial pass rate: 65% to 83%.
  • THC: 20.1% to 22.1%.
  • Cost to produce: $2.97 to $1.72 per gram, a 42% reduction.
  • Cultivation labor: $862,000 to $418,000, a 52% reduction.
  • Revenue: $4.2 million to $9.9 million at about $1,400 per lb, with a 2021 net profit of $4.38 million.
  • Return: 1024% ROI on $404,000 of capex and a 1.04 year payback.

Figures are client reported.

What did not go to plan

The 83% pass rate was a clear gain but still short of the 95% Urth & Fyre now holds as the standard. The protocols that closed that gap came out of later work, covered in our microbial compliance case study.

Related equipment

This scope covered lighting, dehumidification and HVAC, airflow, fertigation and post harvest automation. Lines Urth & Fyre specifies and sources for this kind of work include Urban Farms HVAC, Anden and Quest dehumidifiers, Breeza Industrial fans and Saturn Supply Co. irrigation. Operators moving off HPS and CMH can compare Thrive Agritech and Gavita LED fixtures. Current inventory is on the equipment marketplace.

To see what a managed program would change in your rooms, read about cannabis cultivation consulting or request a facility assessment.

More results —

Next case study