Ispire sells empty vape hardware in two closure styles, and that choice sets your fill line. Ispire cartridges with press fit mouthpieces need a capper, and the TPM we stock caps 252 at a time. Ispire ONE and the newer self sealing E and S Series devices are built to skip capping, which moves the bottleneck to filling.
What does Ispire make for cannabis operators?
Ispire makes empty cannabis cartridges, disposables, pods and batteries that brands fill with their own oil. Ispire Technology Inc. is a Los Angeles company listed on Nasdaq as ISPR, and its fiscal 2026 annual report says it sells cannabis hardware mainly on an original design manufacturer basis to other vape companies.
That ODM model matters on the floor. Ispire does not fill, so every leak, underfill and cracked mouthpiece after delivery belongs to your SOP. The same report lists revenue of $96.0 million for the year ended June 30, 2026, and says most products come from Shenzhen Yi Jia, a supplier, with a company plant in Senai, Malaysia, currently assembling components.
For a quick read on the lineup and how we source it, see our page on Ispire vape cartridges and filling equipment. The rest of this post is about what each family asks of the people who fill it.
Ispire hardware families at a glance
Ispire hardware falls into five groups, and closure type varies by SKU inside them. Press fit cartridges need a separate capping step, sealed and self sealing formats are built to skip it, and custom builds put closure in the spec you negotiate. Sort your SKUs by closure before you price any equipment.
- DuCore cartridges: the 2020 launch line, built on a patented dual ceramic coil with two heating cores and adjustable airflow, sold with a range of cartridge, mouthpiece and color options.
- Ispire ONE: introduced in June 2023 and shown at the Champs Trade Show in Las Vegas that July. Ispire says the devices are sealed in a sterilized factory environment and designed to eliminate capping issues in manufacturing and contract packing.
- E Series: EA02-10-S, EA03-10-S and EA04-10-S/O. The EA04 is the one built for high viscosity oils, with a self sealing tank.
- S Series: SA05-10-S with draw and button activation, SA03-10-S/O postless disposable with a self sealing fill system and a 270 mAh battery, and SA04-10-S/O, a self sealing single use device.
- C Series: custom ODM devices built to a brand's form factor, heating method and materials.
Ispire listed the E, S and C Series in its MJBizCon 2025 announcement without fill volumes or coil specs for most models. Ask for the spec sheet on every SKU before you set a launch date.
How the Ispire DuCore cartridge handles different oils
The Ispire DuCore cartridge runs two ceramic heating cores instead of one, which spreads heat across more surface and suits thicker oils that starve a single coil. Ispire has marketed it since July 2020 with adjustable airflow and a leak resistant tank design. Coil resistance and inlet size vary by SKU, so pull them from the spec sheet.
Inlet size is where most first runs go wrong. A review in Cannabis Science and Technology puts it plainly: high viscosity extracts need larger apertures, and low viscosity extracts need smaller ones. Put a thin, terpene heavy live resin in a cartridge with big inlets and it floods the coil. Put a straight distillate in small inlets and it dry hits.
The same review gives vaporization ranges that help you match coil behavior to oil:
- Distillate: 400 to 450°F, thick and highly viscous, usually cut with terpenes.
- Full spectrum oils: 350 to 420°F, with lower targets as terpene content rises.
- Live resin: 300 to 380°F, lower viscosity and heat sensitive.
- Rosin: thick and solventless, with delicate terpenes and no published range.
Lower resistance coils pull more current and run hotter, which suits heavy distillate. Higher resistance coils heat more evenly at lower temperatures, which suits terpene rich oils. A dual coil does not change that physics. It gives thick oil more wicking surface.
Does Ispire ONE need a capping machine?
Ispire ONE is designed so you do not need a separate capping machine. Ispire's annual report says the platform is built to eliminate capping issues in manufacturing and contract packing, and that devices arrive sealed from a sterilized factory environment. Your fill equipment still has to work with that sealed format.
That is the catch. A sealed device fills through a port or valve the hardware maker designed, not through an open tank you top off with a needle. Get Ispire's written fill instructions for the exact SKU, including needle style, fill temperature and how the seal closes after the needle backs out. Ispire did not publish that procedure, and we would not buy a filler for Ispire ONE without it.
Ispire pairs this format with its own I-80 filler, and an April 2024 agreement had Ispire supply a subsidiary of Acreage Holdings with Ispire ONE products and filling machines as one package. Our I-80 and vape cartridge filling machine comparison covers throughput and where a semi automatic filler still makes more sense.
Which Ispire formats still need press capping?
Any Ispire cartridge with a press on mouthpiece needs a press capping step at a controlled force. Self sealing Ispire formats do not. Battery powered disposables are a separate case, because most hydraulic cappers are not built to press on a device with a cell inside.
The Thompson Duke TPM press, available now at $10,900, is a good example of what press capping takes. It is a 30 ton hydraulic press that caps up to 252 press on mouthpieces in one cycle, adjusts from 1 to 30 tons in half ton steps, and runs on 120VAC hydraulics with no compressed air. Ours is a 2022 unit with a 10 by 10 dimple plate at 17.5 mm spacing.
.jpeg)
Two limits matter for Ispire buyers. Thompson Duke does not recommend the TPM for devices containing batteries, so it fits cartridges and leaves AIO disposables out. And the dimple plate has to match your cartridge's diameter and pitch. Confirm both before you assume a press you already own will run a new SKU.
Capping force is the other variable. Too little and mouthpieces lift in transit. Too much and you crack glass or ceramic. Our guide to press capping force and micro cracks walks through setting it per SKU.
How to pick an Ispire SKU for your oil
Pick the Ispire SKU by oil first, closure second and volume third. An oil that runs well in the device but fails on your line costs as much as a device that clogs. We see brands choose hardware on looks, then spend a month chasing leaks the spec sheet could have predicted.
- Match viscosity to inlets and coil. Heavy distillate goes to larger inlets and a lower resistance coil. Live resin and other terpene rich oils go to smaller inlets. Ispire positions the EA04 for high viscosity oils.
- Decide on closure. Press fit means you own capping force, plates and a crack check. Self sealing means you depend on the maker's fill procedure and port design.
- Check lead time by plant. Ask whether your SKU ships from the Shenzhen supplier or the Malaysian plant, which opened in February 2024 with ISO 9001, ISO 14001 and ISO 13485 certification.
- Run a trial on your oil. Fill a full tray on the exact hardware lot and the exact filler, then hold it at room temperature and at the warmest temperature your shipping route sees.
Viscosity and temperature move together, so the fill temperature you settle on during the trial becomes part of the SKU record. Our guide to cannabis extract types lays out how distillate, live resin and rosin differ before they reach the cartridge.
What records to keep for each hardware lot
Keep the spec sheet, lot number, coil resistance, fill volume, fill temperature and capping force for every hardware lot you run. When a lot leaks or tests oddly, that record tells you whether the problem is the device, the oil or the line. Without it you are guessing.
Ispire states that its ISO 13485 plant is in Malaysia, but certification follows the plant, not the SKU. Ask for the certificate that matches the building your lot came from. If your state's testing program flags hardware, a cannabis compliance consultant can help you tie lot records to lab results before an auditor asks.
Ispire FAQ
Is Ispire hardware made in China?
Mostly. Ispire's fiscal 2026 annual report says a majority of its products are made and supplied by Shenzhen Yi Jia. The company also runs a plant in Senai, Malaysia, which began operating in February 2024 and is currently focused on assembling components. Ask which site builds your SKU, because lead time and certificates follow the plant.
Can I fill Ispire cartridges by hand?
You can fill press fit Ispire cartridges with a heated syringe for samples, but hand filling drifts on fill weight once you pass a few hundred units a day. Sealed Ispire ONE devices fill through a designed port, so follow Ispire's SKU instructions. For production, a benchtop semi automatic filler with heated oil gives repeatable doses and fewer air pockets.
What is the difference between DuCore and Ispire ONE?
DuCore is a coil technology. It uses two ceramic heating cores and appears across Ispire cartridges and devices. Ispire ONE is a sealing approach, with devices sealed at the factory and designed so you skip separate capping. A single product can use both, so ask Ispire which coil and which closure each SKU carries before you order fill equipment.
Does Ispire sell to small brands?
Ispire does not publish minimum order quantities. Its annual report says it sells cannabis hardware mainly on an ODM basis to other vapor brands, which usually means volume commitments and branded SKUs. Contact Ispire's cannabis sales team for current minimums, and plan sample orders early enough to run a fill trial on your own oil.
If your Ispire SKUs are press fit, the request equipment form is the quickest way to get a filler and capper quoted to your fill volume and daily count, or you can claim the in stock TPM above before it goes.