A vape cartridge filling machine is sized by daily count and closure type. Ispire rates its I-80 at 4,000 sealed 0.5 ml devices an hour, about 30,000 a shift, but only on its self sealing hardware. A semi automatic MCF1 tops out near 5,000 a day, so the I-80 suits one high volume Ispire SKU, not a mixed menu.
What is the Ispire I-80 vape cartridge filling machine?
The I-80 is Ispire's automatic vape cartridge filling machine, announced on October 2, 2024 and shown at the Benzinga Cannabis Capital Conference in Chicago that month. Ispire rates it to fill and seal 4,000 vapor devices of 0.5 ml per hour, and says its self sealing devices remove the separate capping step.
The company's own comparisons, as reported by Cannabis Business Times, are 10 times faster than manual filling and 2 times faster than current automated systems, with savings of about $1,000 for every 10,000 units. Those are Ispire's figures. No independent test has been published, and Ispire has not released price, footprint or a compatible device list.
So read the 4,000 per hour number as a ceiling for one device at one fill volume. Ask for the rate on your SKU, your fill volume and your oil, and ask to watch a run on material close to yours. For the hardware side of that decision, our Ispire DuCore and Ispire ONE hardware guide sorts each family by closure.
How many cartridges per day do you need to justify an automatic filler?
An automatic filler pays off once one SKU runs past what two or three semi automatic stations can fill in a shift, which is roughly 10,000 to 15,000 units a day. Below that, the labor saved rarely covers the price, the changeover time and the dependence on one hardware format.
Here is the arithmetic we run with buyers, using published maker figures:
- I-80: 4,000 per hour times 7.5 productive hours is about 30,000 devices per shift, at 0.5 ml, on self sealing Ispire hardware.
- Thompson Duke MCF1: up to 5,000 cartridges per day per station, according to Thompson Duke's 2022 production milestone release, with one operator on a foot pedal.
- Equivalent stations: one I-80 at its rating does the work of about six MCF1 stations and six operators.
- Claimed savings: Ispire's $1,000 per 10,000 units works out to about $0.10 per device, or roughly $3,000 per full I-80 shift if the rating holds.
The trap is the word "if." A line that changes SKU three times a day, or fills 1.0 ml press fit carts as well as 0.5 ml sealed devices, will not see the rated number. If you want this modeled against your labor rate and order book, our cannabis profitability consulting team builds the buy versus outsource case.
Semi automatic or automatic vape cartridge filling machine?
Choose a semi automatic vape cartridge filling machine when you run many SKUs, several oils or both press fit and sealed hardware. Choose an automatic one when a single format runs most of the day. Every SKU change on an automatic line costs output, and the I-80 sits at the far end of that trade.
Our separate post on semi automatic vs automatic cartridge filling machines covers cost bands and upgrade timing across brands. For Ispire buyers the question is narrower. The I-80 is tied to Ispire's self sealing devices, so buying one is also a decision to standardize hardware on Ispire for that volume.
That is not a bad decision for a brand already committed to Ispire ONE. It is a bad one for a contract filler whose customers bring their own carts.
How heated filling handles viscosity on semi automatic lines
Semi automatic fillers control viscosity by heating the oil in the reservoir and dispense path, so distillate, live resin and rosin can share one machine with different recipes. Thompson Duke describes the MCF1's patented heated dispense system as adjusting viscosity, dispense speed and force, with oil changes in under a minute.
The MCF1 units we have sold came with a 140 mL product reservoir, a 5 mL dispense syringe, two 50 W halogen heat lamps and needles in 14, 16 and 18 gauge. Thompson Duke cites less than one gram of product loss when cleaning dispense parts. That changeover speed is the real reason small brands keep a semi auto station even after they buy automation.
Temperature is the setting most rooms get wrong. Too cool and thick distillate strings off the needle and underfills. Too hot and live resin loses terpenes and thins enough to leak past the coil. Our post on hot fill windows for live resin and rosin gives starting profiles to trial. Ispire has not published how the I-80 heats oil, so ask for that during the demo.
Do you still need a capper after the filler?
You need a capper after the filler for any press fit cartridge, and you skip it only on self sealing hardware like the formats the I-80 runs. Most mixed menus include both, so most lines still need a press. Plan the capper's tray size and cycle around the filler's output, not the other way round.
The Thompson Duke TPM mouthpiece press we have available at $10,900 caps up to 252 press on mouthpieces per cycle with automatic force control from 1 to 30 tons in half ton steps. It runs on 120VAC hydraulics with no compressed air, and Thompson Duke does not recommend it for devices that contain batteries.
.jpeg)
On install day, set the press beside the filler so trays move straight across. Load mouthpieces, press, then pull a sample from each tray corner and the center for a crack and lift check. The press takes filled Thompson Duke trays from the IZR or ACF1 automatic fillers, so a later upgrade can keep the press.
What to check before buying a used vape cartridge filling machine
Check dose accuracy across a full tray, heater response and the parts kit before you pay for a used vape cartridge filling machine. A filler that doses well on the first ten carts and drifts by the hundredth usually has a worn syringe, a sticky check valve or a heater that cannot hold setpoint.
- Dose check: fill a full tray at your target volume and weigh every tenth cartridge.
- Heat check: time how long the reservoir takes to reach your fill temperature and whether it holds through a full reservoir.
- Parts: confirm syringes, tubing, valves, needles and heat lamps are included, and price the ones that are missing.
- Air: the MCF1 is pneumatic, so confirm your compressor delivers clean, dry air at the pressure the manual lists.
Our last Thompson Duke MCF1 sold at $7,000 with new consumables, and we can source another through the request form below. Match the filler to the oil types in our cannabis extract types guide before you set recipes. The Ispire vape hardware and filler page tracks what we can quote from Ispire directly.
.avif)
Vape Cartridge Filling Machine FAQ
How much does the Ispire I-80 cost?
Ispire has not published a price for the I-80. Its October 2024 announcement directed buyers to its cannabis sales team for demos. Expect the quote to depend on the device format and on any hardware supply agreement, since Ispire has sold filling machines and its devices as one package, as in its April 2024 deal with an Acreage Holdings subsidiary.
Can the I-80 fill other brands' cartridges?
Ispire has not said. Every published I-80 figure refers to its own self sealing 0.5 ml devices, and the capping claim depends on that self sealing design. If you also fill press fit carts from another supplier, ask Ispire in writing which formats the I-80 runs and at what rate, and plan for a separate filler and press if the answer is none.
How fast is a semi automatic cartridge filler?
Thompson Duke rates its MCF1 at up to 5,000 cartridges per day with one operator on a foot pedal. Real output depends on oil viscosity, fill volume and how often you change products. Thick distillate at 1.0 ml fills slower than thinner oil at 0.5 ml, so time a full tray on your own material before you plan staffing.
Does a filling machine work for disposables?
Many fillers dispense into disposables, but capping is where disposables differ. Battery devices often cannot go into a hydraulic press, and Thompson Duke does not recommend its TPM for them. Ispire's self sealing disposables, such as the SA03 postless model, are built to close without a press. Confirm both fill and closure steps with the device maker.
Send your SKUs, oils and daily count through the equipment request form and we will quote a filler and capper sized to them, starting with the in stock TPM.