Equipment Education8

Multihead Weigher Buying Guide for Cannabis

Multihead weigher buying guide for cannabis flower: head count, eighths per minute, NTEP Class II and a used 14 head Canapa system listed at $74,900.

Cured flower held beside a water activity analyzer
Cured flower held beside a water activity analyzer

Buy a multihead weigher for cannabis by target weight and units per minute, then confirm the NTEP certificate. A 14 head PrimoCombi is rated at up to 60 eighths a minute and 15 to 25 one ounce units a minute. Below roughly 20 units a minute, a semiautomatic combination weigher and a good check weigher usually cost less to own.

That last threshold is our judgment from packaging rooms we have laid out, not a manufacturer number. The rest of this guide is the purchase decision: heads, speed, accuracy, certification and what to inspect on a used unit. Operating detail for sticky or dusty material lives in our other posts, linked below.

How does a multihead weigher work on cannabis flower?

A multihead weigher splits product across many small buckets, weighs each one, and dumps the combination of buckets that lands closest to target. ATS, which owns Paxiom, says each PrimoCombi head includes a dedicated load cell and the machine's PC picks the closest combination. No single bucket has to hit 3.5 g.

That matters more for flower than for snacks. A snack weigher sees pieces that are roughly uniform. Cured flower arrives as a mix of dense nugs, small buds and shake, and one large nug can be a quarter of an eighth by itself. Combination weighing absorbs that spread because the controller can pair a heavy bucket with a light one.

Flower also sticks, sheds trichomes and builds static. Feed pans, bucket surfaces and cleaning frequency decide whether the weigher holds tolerance through a full shift. Our post on multihead weigher changeovers for sticky, dusty and oily product covers that floor work in detail.

How many heads does a multihead weigher need for cannabis?

For cannabis flower we start the conversation at 14 heads, which gives the controller enough combinations to hit eighths and ounces without much giveaway. Paxiom builds the PrimoCombi family in 10, 14, 16 and 24 head versions. More heads mean more combinations per cycle, which tightens accuracy and raises speed, at the cost of footprint and price.

  • 10 heads: fewer combinations, smaller frame. Fits a single SKU room with modest volume.
  • 14 heads: the configuration Canapa certified for cannabis flower in 2023 and the one on our used listing.
  • 16 and 24 heads: more combinations per cycle for higher rates. We rarely see the volume in cannabis to justify 24.

Bucket volume matters as much as head count. An ounce of fluffy flower takes far more space than an ounce of dense indoor buds, so ask for the bucket size and test your lightest strain before you sign.

How fast is a multihead weigher on eighths and ounces?

A 14 head PrimoCombi is rated at up to 60 eighths a minute, about 3,600 an hour, and 15 to 25 one ounce units a minute, or 900 to 1,500 an hour. Those figures come from the system on our listing and depend on product density, packaging and settings. Real rates on a sticky strain will be lower.

The weigher is rarely the bottleneck. Jar indexing, lid placement and the check weigher set the line rate in most rooms we see. Before you pay for a 24 head machine, time how fast your filler and capper can move a container. A weigher that dumps 60 times a minute into a station that indexes 30 jars a minute is wasted capital.

Plan the reject path at the same time. Our post on buffer and reject strategy for multihead weighers shows how to set targets so speed does not turn into overfill.

How accurate does a multihead weigher need to be for an eighth?

Under NIST Handbook 133, the national test procedure for packaged goods, an eighth labeled 3.5 g should be short by no more than 0.35 g on any single package. Table 2-5 sets the maximum allowable variation at 10 percent of labeled quantity for packages under 36 g.

That limit is the floor, not the target. Handbook 133 also fails a lot when the sample average comes in below the label, and it counts packages short by more than the MAV as unreasonable minus errors. In practice operators set the target slightly above 3.5 g and fight giveaway, which is where a tight weigher pays for itself. Every 0.05 g of average overfill on 3,600 eighths an hour is 180 g of flower an hour.

Our HB 133 guide for cannabis SKUs walks through sampling and lot math if your compliance lead wants the full method.

Does a multihead weigher need NTEP certification?

Yes, if it fills packages sold by weight. Check your state's device rules, but we would not buy an uncertified weigher for retail product. An NTEP Certificate of Conformance from the National Conference on Weights and Measures shows the model passed type evaluation. NCWM posts certificates publicly in its online NTEP database, so you can check any number a seller gives you.

Canapa reported that the 14 head PrimoCombi earned an NTEP certificate in Accuracy Class II in February 2023. Testing ran in house, in the field and in a temperature controlled chamber, including 100 hours of operation and repeated static tests to capacity. The machine carries a Category 3 event logger that records calibration changes.

Two cautions. A certificate covers a model and configuration, so confirm it matches the heads, software and capacity of the unit you buy. And certification does not replace your state's field inspection. Our cannabis compliance consulting team can map the device and records to your state's weights and measures rules.

Multihead weigher, combination weigher or check weigher?

A multihead weigher fills packages automatically. A semiautomatic combination weigher has an operator load the buckets. A check weigher verifies a package after filling. Most lines that buy the first still need the third, so price them together.

  • Automatic multihead weigher (PrimoCombi): 10 to 24 heads with a vibratory feeder; fills containers, jars, bags or cartons. Best above roughly 20 units a minute or with several SKUs a day.
  • Semiautomatic combination weigher (SuperSelect): Paxiom positions it for dry flower weighing and portioning at a lower price. Operators hand load and the controller picks the combination. Labor goes up; capital goes down.
  • Check weigher (Pre-CheQ): an EMFR weigh cell engineered to read to 0.001 g. Canapa places it after the fill and before the package, and sends out of tolerance portions to a bin for reuse.
  • NTEP scale at a bench: the cheapest path, and the slowest. Fine for a craft brand doing a few hundred units a day.

The Paxiom group sells all of these, so one quote can cover the full weigh and verify station. See the Paxiom and Canapa weighing and packaging machines page for the rest of the lineup.

What should you check on a used multihead weigher?

Run your own flower through it before you pay, because a used multihead weigher that held tolerance on gummies can drift on sticky indoor buds. Bring a strain that gives you trouble, run at least a few hundred units and weigh every one on a separate certified scale. Then work through the hardware.

  • Load cells: zero each head empty and with a test weight. A head that will not settle points to a damaged cell or loose mounting.
  • Contact surfaces: look for scratched pans and bucket doors that do not close square. Both trap resin.
  • Controls: record the software version, touchscreen condition and whether the event logger history is intact.
  • Certificate: get the NTEP number and match it to the nameplate.
  • Support: ATS completed its purchase of Paxiom in July 2024. Ask which entity now supplies parts and service for older serial numbers.
  • Rigging: plan forklift access and ceiling height for the weigher, platform and feeder.

The used Canapa precision NTEP weighing system on our site is available at $74,900. It is a 2020 build with a 14 head PrimoCombi, a Pre-CheQ analyzer, a vibratory feeder and the filling hardware, about 2,300 lb across three skids. If you also bag pre-rolls, read our companion guide on pre-roll tube and tray packaging machines.

Canapa NTEP weighing and filling system listed by Urth & Fyre
Canapa NTEP weighing and filling system, listed on Urth & Fyre at $74,900.

Multihead Weigher FAQ

Is a multihead weigher the same as a combination weigher?

Mostly, yes. Combination weigher describes the method, picking a set of partial weights that adds up to target. Multihead weigher describes the machine, a ring of heads that each weigh a portion. Paxiom uses both terms: the PrimoCombi is an automatic multihead combination weigher, while the SuperSelect is a semiautomatic combination weigher that an operator loads by hand.

How much does a multihead weigher cost?

New pricing depends on head count, bucket size, feed system and the filler underneath, so get a written quote against your SKU list. For a used reference point, the 14 head Canapa system on our site, sold with its check weigher and feeder, is listed at $74,900 and available today. Budget separately for installation, rigging and a field inspection.

Can a multihead weigher fill jars and pouches on the same line?

Yes, if the discharge and the filler underneath are set up for both. ATS says the PrimoCombi can fill containers, jars, bags or cartons. The weigher itself does not care about the package; the indexing table, pouch opener or bagger does. Changeover time between formats is the number to ask for, because it decides how many SKUs a shift can run.

Do you still need a check weigher after a multihead weigher?

In most cannabis lines, yes. The weigher controls the fill, but a check weigher after it proves each package before it leaves the room and gives you a reject record when a bucket sticks or a door hangs open. Canapa builds the Pre-CheQ for that role, and it sends out of tolerance portions back for reuse rather than to waste.

To source a weigher, send your SKU list and units per minute through the equipment request form and we will quote new Paxiom options next to any used systems we can find.

Trevor Christensen
Trevor Christensen

Founder of Urth & Fyre. 1M+ square feet of cannabis facilities designed and optimized. Every answer on this site is his.

About Trevor →
Read next —

More from the blog