NugSmasher sells seven heated rosin presses, and the choice comes down to plate size and drive. The Mini, XP, Touch and iQ use small plates and top out at 28 grams of flower per press. The Pro, Pro Touch and iQ Pro move to 7 x 10 inch plates and up to 84 grams, at $4,996 to $19,996 product only.
Everything below comes from NugSmasher's own product pages and manuals as listed in November 2026. Where the company does not publish a number, such as tonnage on the iQ line, we say so rather than fill the gap.
Which NugSmasher press fits R&D and which fits production?
For R&D, a NugSmasher with 4 x 6 inch plates (XP, Touch or iQ) covers strain testing at up to 28 grams per press. For production, the 7 x 10 inch class (Pro, Pro Touch or iQ Pro) triples the plate area and raises the published load to 84 grams of flower per smash.
The Mini is a sampling tool. At 2 tons and 2.5 x 2.5 inch plates, it presses up to 7 grams, which is enough to check a cultivar before you commit a batch to the big press. We would not plan any sellable output around it.
The split that matters in a licensed facility is labor. A manual arm costs operator effort on every cycle, while the iQ and iQ Pro run a programmed recipe. If several people press on different shifts, that consistency is worth more than the price gap.
What are the specs of each NugSmasher model?
Each NugSmasher model below is listed with the tonnage, plates, heat and capacity that NugSmasher publishes on its product pages. Prices are product only, without bundles, as shown on nugsmasher.com in November 2026, and several models were marked out of stock at that time.
NugSmasher Mini
- Force: 2 tons from a manual pump arm
- Plates: 2.5 x 2.5 x 1.25 inch, each with a 70 watt heater
- Power: standard 120 volt wall outlet
- Capacity: up to 7 grams per press
- Price: $466.67 (listed out of stock)
NugSmasher XP
- Force: 12 tons, manually controlled with a removable pump arm
- Plates: 6 x 4 inch, quad heated, 160 watt elements
- Controls: digital temperature control and a built in gauge that reads to 6,000 psi
- Capacity: up to 28 grams
- Price: from $1,546
NugSmasher Touch
- Force: 12 tons with a removable manual pump arm
- Plates: 4 x 6 inch with quad 160 watt elements
- Controls: 5 inch capacitive touchscreen with digital temperature control and a hydraulic fluid psi readout
- Capacity: up to 28 grams of flower per smash
- Price: from $2,996
NugSmasher iQ
- Drive: fully automatic, CNC controlled, no air compressor
- Plates: 4 x 6 inch with four 160 watt elements
- Power: 110 or 220 volt single phase wall power
- Modes: Ramp Mode for hash and isolate, Decarb Mode, recipes through the NugSmasher app
- Capacity: up to 28 grams of flower per session
- Price: from $4,996
NugSmasher Pro and Pro Touch
- Force: 20 tons, pneumatic thumb control or manual pump arm
- Plates: 7 x 10 x 1.5 inch with six 160 watt elements, three per plate
- Controls: dual digital temperature control on the Pro; a 10 inch touchscreen on the Pro Touch
- Capacity: up to 84 grams of flower per smash
- Price: Pro from $4,996; Pro Touch listed out of stock with no price
NugSmasher iQ Pro
- Drive: fully automatic with a variable speed pump, no compressor
- Plates: 7 x 10 inch with six 160 watt elements
- Power: 110 or 220 volt single phase
- Controls: hash, flower, isolate and decarb modes, app control over WiFi and Bluetooth, operator recipe lockout, and readouts for hydraulic, total and surface area psi
- Price: from $19,996 (listed out of stock)
The iQ Pro product page does not state a tonnage or a gram rating, so ask for both in writing before you size a room around it.
How do 4 x 6 and 7 x 10 inch plates change the math?
A 4 x 6 inch plate has 24 square inches of surface and a 7 x 10 inch plate has 70, so the bigger NugSmasher plate holds almost three times the bag footprint. That is where the jump from 28 grams to 84 grams per press comes from.
Tonnage has to spread over that area. Twelve tons is 24,000 pounds of force, or 1,000 psi if a load covered a full 4 x 6 plate. Twenty tons over a full 7 x 10 plate works out to about 571 psi. In practice bags cover only part of the plate, so pressure at the bag runs higher, and the twin post on the NugSmasher Pro gauge and plate pressure math walks through NugSmasher's own conversion chart.
The takeaway for buyers: a bigger plate is about loading more bags per cycle, not about pressing harder. If your recipe work runs one 7 gram bag at a time, a 4 x 6 press does the job.
Should you buy a manual, pneumatic or automatic NugSmasher?
Buy a manual NugSmasher (Mini, XP or Touch) when one operator presses small lots and labor is cheap. Buy the pneumatic Pro when you want 7 x 10 inch plates at the lowest price and have shop air. Buy the iQ or iQ Pro when written SOPs need the same recipe on every shift.
The Touch sits between. It keeps the manual arm but adds a touchscreen and a psi readout, and NugSmasher says operators can set a target material psi on screen. That is a real step up from reading a dial gauge mid press.
The Pro's pneumatic side needs a compressor with 90 to 120 psi working pressure and a 3 gallon or larger tank, per the NugSmasher Pro product page. The iQ and iQ Pro skip the compressor entirely and plug into 110 or 220 volt single phase power.
The iQ Pro's operator lockout is the feature we would weigh hardest in a multi shift room. A supervisor sets the recipe and line staff cannot change it, which keeps batch records clean.
What does each NugSmasher press cost?
NugSmasher product only prices in November 2026 run from $466.67 for the Mini to $19,996 for the iQ Pro, with most models shown at a sale price under a struck list price. Bundles with bags, molds and collection tools add to that, up to about $27,107 on the iQ Pro.
- Mini: $466.67 (struck price $656)
- XP: $1,546 (struck price $1,996)
- Touch: $2,996 (struck price $3,996)
- iQ: $4,996 (struck price $6,995)
- Pro: $4,996 (struck price $7,500)
- iQ Pro: $19,996 (struck price $29,995)
The iQ and the Pro land at the same $4,996. That is the real decision point for a growing processor: automatic control on 4 x 6 inch plates, or manual and pneumatic pressing on 7 x 10 inch plates.
NugSmasher also lists factory refurbished units with a 30 day warranty and runs a loyalty upgrade program, though the refurbished page says upgrade credit does not apply to refurbished units. If you are weighing a used press against a new one, our new vs used equipment guide covers the documentation and acceptance steps.
Where does a NugSmasher press sit in a solventless line?
A NugSmasher press is the last step of hash rosin production, after washing, collection and drying. Size it to the dried hash your wash room produces, because a 7 x 10 inch press waiting on hash is idle capital.
NugSmasher's own wash option is the NugWasher, a 25 gallon stainless unit listed at $14,995. For more wash capacity, Urth & Fyre has a used Lowtemp Osprey 75 gallon washer listed at $22,000 and available now. The commercial bubble hash wash vessel guide covers vessel sizing and water planning.

For the whole chain from washer to press, see our rosin press and solventless equipment guide and the NugSmasher rosin press lineup page. If you are modeling whether to press in house or send material out, our profitability consulting team builds that math against your actual wash volume.
NugSmasher FAQ
What is the difference between the NugSmasher XP and Touch?
Both are 12 ton presses with 4 x 6 inch plates and a 28 gram ceiling. The XP uses a manual pump arm with a dial gauge that reads to 6,000 psi. The Touch keeps a removable manual arm but adds a 5 inch touchscreen with a hydraulic psi readout and a target material psi setting. The Touch lists at $2,996 against $1,546 for the XP.
Does the NugSmasher iQ need an air compressor?
No. NugSmasher describes the iQ and iQ Pro as fully automatic, self contained presses that run on 110 or 220 volt single phase wall power. Only the Pro and Pro Touch offer pneumatic operation, and those also accept a manual handle. The iQ manual lists the unit at 55.5 pounds, so plan a stand rated for that weight.
How many grams can a NugSmasher press at once?
NugSmasher publishes 7 grams for the Mini, 28 grams for the XP, Touch and iQ, and 84 grams of flower per smash for the Pro and Pro Touch. Some Pro copy also says up to a quarter pound of material. The iQ Pro page gives no gram figure, so confirm loading with the factory before you plan throughput.
Is the NugSmasher iQ Pro worth four times the price of the iQ?
It depends on plate area and staff. The iQ Pro moves to 7 x 10 inch plates and adds hash, isolate and decarb modes, a surface area psi readout and an operator lockout. For a single operator pressing 28 gram lots, the $4,996 iQ covers it. For a production room with several pressers and SOPs, the lockout and plate size carry the cost.
Tell us the model, plate size and weekly hash volume and we will quote it through a NugSmasher equipment request.